Antari Onboard DMX Bedienungsanleitung PDF herunterladen (Seite 7)

Antari Z-1500II, Z-3000II on-board DMX Fog Machine Settings

DMX Setting for Z-1500II & Z-3000II fog machines with on board DMX

Channel A

0 - 5 = OFF

6 – 249 = Volume Control ( 5% - 95%)

250 – 255 = Maximum Volume Output (100%)

The Z-1500II & Z-3000II Fog Machines have on-board DMX control. These two models use 1 channel to

control volume output

operation. Each channel has a value range of 0 to 255. Timer functions such as duration

and interval can be programmed using the DMX controller or the DMX control software being used by lighting

and effects operator.

If Channel A has a value from 0 to 5, the unit is OFF.

Between the values 6 to 249 the volume of fog output is regulated. With 6 being the minimum volume of

fog produced and 249 approaching the maximum. The volume output rises as the DMX value is increased.

If Channel A has a value from 250 TO 255, the machine will operate at maximum output.

Note: In the example above, if the machine were assigned the DMX address of 124, Channel A would

correspond to DMX address 124.

In general, Antari fog machines with onboard DMX conform to the following performance specifications:

1. Average Operating temperature = 250ºC

2. Fogger can maintain maximum output for 30 seconds or more

3. Fogger can maintain constant output at 30% volume setting (roughly a value of 75).

1 2 3 4 5 6 7

Keine Kommentare

Antari Onboard DMX Bedienungsanleitung Seite 7